Uwell brought us the popular Crown tanks, as well as the Uwell Valyrian, one of the most praised sub-ohm tanks. When I think of Uwell, I think of their sub-ohm tanks more frequently than their mods and kits, only because it seems their atomizers have won them the most recognition. I came across the Uwell Hypercar 80W Starter Kit thanks to a friend of mine. Although this kit claims to be for both an MTL and a restricted DTL, the Whirl tank is really a MTL tank. Is this kit really worthy of praise? Or is it a let down?To get more news about 510 thread tank, you can visit univapo official website.

The Design

The Uwell Hypercar 80W TC Starter Kit looks like a sleek, expensive car. It’s not the most unique design I’ve come across, but it makes a nice impression. It fits very easily in the hand and it’s got a nice amount of venting on the sides of the mod to prevent the battery from getting too hot.

On the front of the mod is an oversized firing button, a 0.96-inch display screen, two adjustment buttons, and a micro-USB port. You’ll find the battery door, for a single 18650 battery, on the opposite end of the front face of the mod. In fact, basically the entire back end piece comes off to reveal the battery compartment. The magnets hold well, but there is a slight jiggle.

There are several colors available: red, gold, sapphire blue, silver, and black. All of the colors correspond well with the car theme they’ve tried to create, so good consistency in my book.The Hypercar is a solid piece of vaping equipment. It’s crafted out of zinc alloy, outputs anywhere from 5 to 80W. The output voltage is 0.7-8v and it has a 0.1-3.0ohm resistance range. The Whirl sub-ohm tank is made of Pyrex glass and the 510 connection is gold plated. It fits nice and flush on the mod without any overhang, but it’s a 24.2mm tank. If you want to use any tank that’s above 25mm, such as an RDA or RTA, you’re going to have some overhang.

Although most starter kits are somewhat straightforward, the Uwell Hypercar has a few different functions that differ from the norm. It’s five clicks of the firing button to turn the device on. Then, you’ll see the display screen go on. The screen can be flipped in either direction. To do this, hold both of the adjustment buttons down until you see the display rotate. You can lock the Hypercar and remain vaping (press and hold the fire button and the ‘+’ button simultaneously). You can also lock the mod to prevent vaping (press and hold the fire button and the ‘-’ button simultaneously).

The Uwell Hypercar 80W TC Starter Kit offers standard power mode, bypass mode, and TC mode with a range of 200-600°F. For those who are mainly TC vapers, be aware that the TC suite on the Hypercar only allows for stainless steel and NiChrome builds. For some reason, Uwell decided to leave Titanium out of it.